Chatillon 01-1829 (TG-12) Bollard Grips
$1,730.80
With this grip, the specimen is wrapped around the bollard and the free end clamped. Grip stresses the specimen are distributed in the material in contact with the bollard circumference. Used on yarn, wool, man-made fibers and other threads and flexible> more ...

Chatillon GF-5 Cord & Twine Grips
FREE Ground Shipping *
$440.33
Three non-locking pin design for figure 8 wrap of specimen assures center break, and permits quick installation and release of test piece. Throat clearance with pins installed and clearance between pins are both 3/8. 500 lb capacity.> more ...

Imada DF-60 Hook for Cardboard Boxes - Only with System
$145.00
Capacity: 44 lbf Width: 60mm Test seal strength with the hook for cardboard boxes.> more ...

Mark 10 AC1073-X Inline Adapters
FREE Ground Shipping *
From: $280.25
Optional remote emergency switch is convenient when the standard emergency switch is inaccessible, for example if a safety shield is used. Includes an 8’ (2.4 m) cable, more ...

Mark-10 G1024 Extension Rod, 200 lb, 5 in
$20.00
For use between force gauges, test stands, and other grips or attachments for general tensile and compression testing> more ...

Mark-10 G1024-1 Extension Rod, 200 lb, 2 in
$20.00
For use between force gauges, test stands, and other grips or attachments for general tensile and compression testing> more ...

Mark-10 G1024-2 Extension Rod, 200 lb, 1 in
$20.00
For use between force gauges, test stands, and other grips or attachments for general tensile and compression testing> more ...

Mark-10 G1025 Chisel Point, 200 lb
$20.00
Compression testing> more ...

Mark-10 G1029 Flat Head, 200 lb
$20.00
Compression testing> more ...

Mark-10 G1032 Chisel Point, 500 lb
$23.75
Compression testing> more ...

Mark-10 G1036 Flat Head, 500 lb
$23.75
Compression testing> more ...

Mark-10 G1038 Hook, 200 lb
$15.00
Compression testing> more ...

Mark-10 G1026 Cone Point, 200 lb
$20.00
Compression testing> more ...

Mark-10 G1027 V-Groove, 200 lb
$20.00
Compression testing> more ...

Mark-10 G1028 Hook, 20 lb
$20.00
Compression testing> more ...

Mark-10 G1031 Extension Rod, 500 lb, 5 in
$23.75
For use between force gauges, test stands, and other grips or attachments for general tensile and compression testing> more ...

Mark-10 G1031-1 Extension Rod, 500 lb, 2 in
$23.75
For use between force gauges, test stands, and other grips or attachments for general tensile and compression testing> more ...

Mark-10 G1031-2 Extension Rod, 500 lb, 1 in
$23.75
For use between force gauges, test stands, and other grips or attachments for general tensile and compression testing> more ...

Mark-10 G1033 Cone Point, 500 lb
$23.75
Compression testing> more ...

Mark-10 G1034 V-Groove, 500 lb
$23.75
Compression testing> more ...

Mark-10 G1035 Hook, 500 lb
$23.75
Compression testing> more ...

Mark-10 G1042 Hook, 1000 lb
$28.50
For use between force gauges, test stands, and other grips or attachments> more ...

Mark-10 G1107 Snap Hook
FREE Ground Shipping *
$123.50
This hook features a snap clasp, for added safety in pull testing applications. Swiveling action ensures proper alignment> more ...

Shimpo Steel Adapters For use with 500 - 1000 lb force gauges
FREE Ground Shipping *
From: $292.50
SHIMPO’s Cord and Twine Grip attachments contain a figure 8 wrap that assures a center break. These grips feature non-locking pins which permit quick installation and release. Throat and pin clearance is 0.375” (9.65 mm) wide with the throat width being 0.5” (12.7 mm). The FG-M10TWN500U is the upper grip only while the FG-M10TWN500UB includes both the upper grip and lower bottom grip attachments. more ...

Shimpo Steel Adapters For use with 2 - 200 lb force gauges
From: $29.00
The Compression Ball Adapter Set is a simple, yet specialized force gauge attachment for testing compression forces over a specific area. These adapters are ideal for use with shape-changing materials such as foam, rubber, sponge, but can also be used in destructive tests on flat surface materials such as glass or stone. more ...

Shimpo M6 Grips For use with 2 - 200 lb force gauges
FREE Ground Shipping *
From: $112.50
SHIMPO’s Small Pin Grip attachments are ideal for gripping fi.ne wires and .laments, which enables precise and accurate testing results for small and hard-to-hold items. With various width and load capacities available, these grips are available in three ranges for checking sample thicknesses of 0.02”, 0.04” and 0.08” (0.5, 1 and 2 mm). more ...

Shimpo FG-M6PIN1 1 mm Pin Head Grip, M6 Thread, 22 lb (11 kg) Capacity
FREE Ground Shipping *
$117.00
SHIMPO’s Small Pin Grip attachments are ideal for gripping fi.ne wires and .laments, which enables precise and accurate testing results for small and hard-to-hold items. With various width and load capacities available, these grips are available in three ranges for checking sample thicknesses of 0.02”, 0.04” and 0.08” (0.5, 1 and 2 mm).> more ...

Shimpo FG-M6CBH60U Carton Box Pull Hook, M6 Thread 50 lb (25kg) Capacity
FREE Ground Shipping *
$166.50
Simple, yet specialized force gauge attachment for testing the required force to open cardboard boxes and similar packages> more ...