Chatillon | Imada | Mark-10
Imada Torque Testing Equipment
 |
HTG2-Series Digital Jacobs Chuck Torque Gauges
Programmable high / low setpoints, 960 data memory, reads in lb-in, kg-cm and N-cm, RS232, digimatic or analog outputs, real time and peak mode selectable, tare, overload alarm and low battery indicator, built in rechargeable NiCad batter and AC adapter |
- 70 x 0.01 oz-in
- 15 x 0.01 lb-in
- 40 x 0.01 lb-in
- 85 x 0.1 lb-in |
From $1425.00 |
 |
DTX2 Digital Cap Torque Tester
Programmable high / low setpoints, 960 data memory, clamps containers from 1/2" to 7" diameter, RS232, reads in lb-in, kg-cm and N-cm, digimatic or analog outputs, real time and peak mode selectable, tare, overload alarm, built in rechargeable NiCad batter and AC adapter |
- 15 x 0.01 lb-in
- 40 x 0.01 lb-in
- 85 x 0.1 lb-in |
$1635 |
 |
Imada DI-5-RL Torque Gauge
Reads in lb-in, kg-cm and N-cm, peak, real time and peak down measuring modes, 400 data memory, programmable high / low setpoints, zero reset, RS232, internal NiCad battery or AC adapter, ±0.5% F.S. ±1 LSD accuracy |
- 0.15 ~ 18 lb-in
- 1.5 ~ 90 lb-in
|
$1085 |
 |
Imada DID4 Torque Screwdriver / Torque Tester
FREE UPS Ground Shipping
Available in: lb-in, oz-in, kg-cm, N-cm or N-m, peak, real time and peak down modes, 400 data memory, programmable high / low setpoints, programmable screw tightening counter and auto zero function, CW and CCW operation, USB , internal NiCad or AC adapter |
- ozf-in 2.0~560.0
- lbf-in 0.20~35.00
- kgf-cm 0.20~40.00
- N-cm 2.0~400.0
|
$685.00 |
 |
Imada DIW-15 and DIW-20 Digital Torque Testers/Wrenches
FREE UPS Ground Shipping
Available in lbf-in, oz-in, kg-cm, N-cm or N-m versions, peak, real time and peak down modes, 800 data memory, programmable high / low setpoints, programmable screw tightening counter and auto zero, CW and CCW operation, USB, internal NiCad or AC adapter |
- 2.0 - 130.0 lb-in
- 2.0-174.0 lb-in |
$1140.00 |
 |
Imada DSW-15 & DSW-20 Torque Wrench
Available in lbf-in, oz-in, kg-cm, N-cm or N-m versions, peak, real time and peak down modes, 400 data memory, programmable high / low setpoints, programmable screw tightening counter and auto zero, CW and CCW operation, RS232, internal NiCad or AC adapter |
- 3-130 lb-in
- 3-180 lb-in |
$1085 |
 |
Imada DIW-75 Torque Wrench
FREE UPS Ground Shipping
Available in lbf-in, lb-ft, kg-cm or N-m versions, wrench head swivels 300°, ±0.5% F.S. ±1 LSD accuracy, 400 data memory, CW and CCW operation, RS232, internal NiCad or AC power, programmable high / low setpoints |
- 2 - 651 lb-in
- 2 - 750 kg-cm
- 0.20 - 75 N-m |
$1430.00 |
 |
Imada DSW-75 Torque Wrench
Available in lbf-in, lb-ft, kg-cm or N-m versions, wrench head swivels 300°, ±0.5% F.S. ±1 LSD accuracy, 400 data memory, CW and CCW operation, RS232, internal NiCad or AC power, programmable high / low setpoints |
- 3 - 660 lb-in
- 0.3 - 55 lb-ft
- 3 x 750 kg-cm
- 0.3 - 75 N-m |
$1430 |
 |
Imada DIW-120 Lightweight Digital Torque Tester/Wrench
FREE UPS Ground Shipping
Imada DIW-120 Lightweight digital torque tester / torque wrench with 1/4" drive, 1040 lb-in capacity and accuracy of 0.5% 1 LSD. Wrench head swivels 300 degrees.. Features 800 data memory, USB, programmable setpoints and more. |
- 20 ~ 1040 lbf-in |
$1450.00 |
 |
Imada DSW-120 Torque Wrench
Imada DSW-120 Lightweight digital torque tester / torque wrench with 1/4" drive, 1040 lb-in capacity and accuracy of 0.5% 1 LSD. Wrench head swivels 300 degrees. Features 400 data memory, RS-232, programmable setpoints and more. |
- 30 ~ 1040 lbf-in |
$1450 |
 |
Imada I-Series Non-Impact Torque Testers for Power Drivers & Wrenches Imada i-series digital torque testers are ideal for calibrating power screwdrivers with torque control. With peak mode, real time mode and peak down mode. Standard 3/8 inch drive. Comes with RS-232, case, 2 adapters. |
- 0.03 ~ 7.0 lb-in (0.001 lb-in)
- 0.3 - 70.0 lb-in (0.01 lb-in)
- 1.5 - 130.0 lb-in (0.1 lb-in) |
from $1625.00 |
 |
DI-3N-Digital Torque Testers with Remote Sensors
Imada DI-3N-IP digital torque testers with a flanged remote sensor calibrates torque tools up to 362 lb-ft with accuracy of +/- 5% FS. Measures in peak, real time and peak down modes. 400 internal memory and RS-232. In lb-in, kg-cm, N-cm or lb-ft, kg-m and N-m |
- 0.30 - 44.0 lb-in
- 3.0 - 440.0 lb-in
- 30.0 - 1800 lb-in
- 3.0 - 145.0 lb-ft
- 3.0 - 362.0 lb-ft |
from $1205 |
 |
Imada DIS-IP Digital Torque Tester with flanged remote sensor
FREE UPS Ground Shipping
Imada IS-IP digital torque testers with a flanged remote sensor calibrates torque tools up to 362 lb-ft with accuracy of .5% F.S., ± 1 LSD. Measures in Peak, Real Time or Peak Down measurement modes. 800 internal memory and USB. In lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m |
- 0.20 ~ 44.00 lb-in
- 2.0 ~ 440.0 lb-in
- 20 ~ 1740 lb-in
- 20 ~ 4400 lb-in |
from $1205.00 |
 |
Imada DI-1M Digital Torque Tester for Air Tools & Impact Torque Wrenches
Imada DI-1M torque testers are perfectly suited for on-the-spot calibration of impact drivers and air tools, but will calibrate any type of power driver. With peak, real time and peak down modes. With RS-232 and accuracy of +/-0.5%. Measures in lb-in, lb-ft, kg-cm, kg-m, N-cm or N-m. |
- 3.0 - 440.0 lb-in
- 30.0 - 1800 lb-in
- 3.0 - 145.0 lb-ft
- 3.0 - 362.0 lb-ft |
$2300.00 |
 |
Imada DI-4B-25 Air Tool & Impact Wrench Digital Torque Tester
Imada DI-4B-25 fast response torque testers are perfectly suited for on-the-spot calibration of air tools and impact drivers, but will calibrate any type of manual wrenches. With peak, real time and peak down modes, RS-232 and accuracy of +/-0.5%. Measures in lb-in, kg-cm and N-cm |
- 3.0~220.0 lb-in |
$1950.00 |
 |
Imada DWT-200 Digital Torque Tester for Manual Torque Wrenches
FREE UPS Ground Shipping
Imada DWT-200, digital torque tester incorporates a proprietary peak down capture mode that calibrates manual torque wrenches up to 1,500 lbf-in with an accuracy of ± .5% F.S., ± 1 LSD. Other features include selectable Peak Down, Peak, or Real Time measurement modes and selectable units lbf-in, kgf-cm, N-m |
- 70~1500 lb-in |
$1530.00 |
Chatillon Torque Testing Equipment
 |
NEW! Chatillon DFS-R-ND Series with Remote Loadcell (0.5 to 1100 lbs) - The Chatillon DFS-R-ND Series force gauges supply accurate load and torque measurement in a common gauge. Ideal for hand held or test stand applications, the DFS-R-ND gauge may be equipped with smart loadcells or torque sensors. The auto-recognition feature knows whether a load or torque measurement is required. Measurement accuracy is better than 0.25% full scale when used with interchangeable sensors. Accuracy is better than 0.1% full scale when specified with a dedicated SCL load sensor. |
Mark 10 Torque Testing
|
Mark 10 MGT Digital Torque Gauges
±0.5% accuracy. Dedicated remote torque sensor with Jacobs chuck and compact size. Rugged aluminum housing with peak memory for clockwise and counterclockwise readings. With push button calibration and 30 readings/second sampling rate.
|
- Capacity: 10 oz-in to 100 lb-in |
from |
|
Mark 10 CTA Closure Tester
±0.5% accuracy. A powerful, yet value priced solution for closure manufacturers, bottlers, food and beverage companies, and others. Broad sample size range, rugged construction and simple hand operation.
|
- Capacity: 12 to 100 lb-in |
$1230.25 |
 |
Mark 10 TST / TSTH Manual Torque Test Stands
Ideal for a wide variety of torque testing applications up to 100 lb-in, including closure torque testing, fastener torque testing, and more. The TST’s versatile modular design allows it to be configured for a variety of torque sensors and gripping fixtures.
|
- Capacity: 100 lb-in |
$2470 |
 |
Mark 10 STA Torque Tool Tester
A simple yet accurate solution for testing torque screwdrivers, wrenches, and other tools. Applications exist in manufacturing facilities in virtually every industry. The STA features a solid aluminum housing, making it rugged enough for many years of service in production or laboratory use, while a universal receptacle with square drive and grooves accepts common bits and attachments.
|
- 12 x 0.01 lbin
- 50 x 0.05 lbin
- 100 x 0.1 lbin |
$1135.25 |
|
