 |
Imada
MH-220 Motorized Horizontal Test Stands
currently in stock
Shipping Weight: 40
lbs. (estimate shipping
cost)
Other Imada
Test Stands
Other Force
Testing Products
This
Month Only! FREE UPS
Ground Shipping on ALL Imada
test stands
MH-220BA (Basic Type)
MH-220AC (Auto Cycle Type)
- Max Load: 220 lbs
- Stroke: 16"
- Optional dynamic and static distance meter available
|
|
Features and Specs
Speed Configurations
| Standard Speed |
0.4 ~4" / min |
| Optional High Speed |
0.8 ~ 8 " / min |
| Optional Low Speed |
0.2 ~ 2 " / min |
Optional Data Buttons and Data
Software
Imada DB-Series data input buttons work with Imada SW
software to automate data collection from Imada force or torque
gauges. Enter peak measurements into the spreadsheet and "zero" the
gauge with a touch of the button. Minimize computer time and
mouse useage
Click here for more info...
Imada motorized test stands offer consistent and reliable
testing. Our Basic or Auto Cycle models are available in Standard,
High, and Low speeds. They accept any of the standard range
Imada force gauges and special attachments. Optional dynamic
and static distance meters are also available
Basic Models: MH-220BA
Basic Models have top and bottom travel limits that can be
adjusted for a precise range of movement. Set the travel limits,
flip the direction switch up to move the cross head up to the
top travel limit at the selected speed. Flip the direction
switch down to send the cross head down to the bottom travel
limit. The speed is set by a Speed Adjust knob. Quick Return
and Emergency Stop features are also included.
Auto Cycle Models: MV-220AC
Auto cycle models have top and bottom travel limits that can
be adjusted for a precise range of movement. Speed Adjust,
Quick Return and Emergency Stop features are also included.
These stands have three function modes
- Manual Mode
While the Direction switch is held up, the head moves up. Holding the switch
down moves the cross head down. When the switch is released the head stops.
This mode is ideal for positioning.
- Single Cycle Mode
When the Direction switch is pushed up, the cross head moves up at the desired
speed, and when it reaches the top travel limit, it automatically goes
back and stops at the bottom travel limit, completing one cycle. Pushing
the switch down runs the cycle in reverse.
- Auto Cycle Mode
This mode is similar to Single Cycle mode, except that the cross head travels
up and down repeating the cycle until either the Power or Emergency switches
is turned off. This mode is ideal for applications such as fatigue testing.
Imada MH-220 diagram |
