 |
Imada
DB-Series Data Input Buttons
currently in stock
Shipping Weight: 1
lb. (estimate shipping
cost)
Other Imada
Force Testing Products
Other Force
Testing Products
|
|
- DB-1: one
channel mode -- collects force or torque data
- DB-2: two
channel model -- collects both force and displacement data
(use with test stands equipped with digital distance meters)
- SW-1: Data
Acquisition Software
- Send data to the PC spread sheet with the touch of a button
- Zero the gauge
- Select different acquisition rates
DB buttons work with Imada SW software to automate data collection
from Imada force or torque gauges. Enter peak measurements
into the spreadsheet and "zero" the gauge with a
touch of the button. Minimize computer time and mouse useage.
DB-1 Data Button
-- Single Channel
DB-1 is a simple, compact, one channel interface that enables
the user to send measurement data to a PC running SW-1, Imada
data acquisition software, or other software.
Single data mode simplifies
peak measuring tests because it also ‘zeros’ the
gauge after sending the data to the computer, thus eliminating
the need to reset manually for each test.
Automatic acquisition mode allows
users to select different acquisition rates from 20 data/second
to 1 data/999.9 seconds. Start data acquisition by clicking
the button, then click again to stop, which simplifies start/stop
functions by eliminating the need to use computer mouse and
screen to control testing. This allows users to focus on
the testing rather than the PC and the data acquisition spreadsheet.
As a visual confirmation, the LED lamp will light up for
both single data and automatic acquisition modes when data
is being sent to the computer.
No external power supply is needed as power is supplied
through the PC. Connect Imada gauges to the data input button
with cable CB203 and the computer to the data button with
a 6' DB9 serial cable (included with DB-1).
DB-2 Data Button
-- double channel
Collect both force and displacement data for analysis with
the SW-2 Imada data acquisition software and DB-2 data button.
SW-1
Data Acquisition Software
 Full
SPC and graphing capabilities - Designed for Imada gauges
- Automates your data collection
SW-1 Imada data acquisition software is a highly customized
Excel spreadsheet specifically designed for capturing and
analyzing real-time data from Imada gauges with a RS-232
port. SW-1 allows real time data from RS-232 instruments
to be input directly into any Windows program – including
Microsoft Excel. SW-1 inputs gauge readings in real time
and provide a running log of all force measurements along
with a chart of the data as well as statistical information
including Min, Max, Mean, Median, Standard Deviation, Average
Deviation and Variance. Complete control of the gauge is
provided through a set of “buttons” on the spreadsheet
that enable easy editing of the sampling rate, force measurement
units, peak/real time, tare and power off.
Other features include a memory download option for AXT, AXT-DPU and DPXH gauges
only. If desired, the entire stack can be saved to disk, analyzed or cleared.
Because all data is entered directly into a standard Excel spreadsheet, you
are virtually unlimited in your ability to analyze your force gauge data using
all of the powerful tools available in Excel.
Hardware Requirements: Imada
Gauge with RS-232 serial port, CB-203 cable, a Pentium or equivalent
with 32MB RAM or better, a mouse and approximately 1 MB hard
disk space.
Windows PC Requirements: Windows
95 or later, Windows NT and Excel ‘97 or later.
|
