Chatillon DFS-R-0100 Series Remote Dedicated Force Gauge, 100 x 0.01 lb - Free Shipping

Features

The Chatillon DFS-R remote dedicated force gauge supplies accurate load and torque measurement in a common gauge. Accuracy is better than 0.1% of full scale when specified with a dedicated SLC load sensor. A large, easy to read, high resolution dot matrix LCD display supports a variety of standard gauge functions, including normal and peak readings, high / low limits, setpoints, pass / fail results, statistical results, load averaging, load comparisons, percentage and sharp break detection, sensor actuation and direction. Measurements are displayed in oz, g, lb, kg and N units or in oz-in, g-cm, lb-in, N-cm and N-m units.

The DFS-R gauge comes standard with an RS-232 cable, carrying case, battery adapter / charger and NIST Certificate of Calibration with data.

Features:

Dedicated sensors
- Load and torque sensors
- Accuracies to better than 0.1% full scale
Advanced Operating Modes
- Normal
- Peak tension, compression and torque
- Percentage or sharp break detection
- Load comparisons and load averaging
- Contact closure
- Load limits
- Pass-fail limits
Statistical Calculations
- Mean with maximum and minimum values
- Coefficient of variation with mean and standard deviation
- Standard deviation with variance and mean
- Percent differentiation
Simple Operator Interface
- High resolution dot matrix display
- Menus with prompts for easy use
- Dedicated and function keys with navigation pod
Standard Outputs - RS-232 serial data, Mitutoyo Digimatic, ±2Vdc Analog
NIST Calibration with Data - available IEC/ISO17025 cert with uncertainty
2 year warranty

Model	ounce	pound	Newton	Price
DFS-R-250G	8 x 0.004	0.5 x 0.0001	2.5 x 0.0005	$1581.75
DFS-R-0002	32 x 0.004	2 x 0.0002	10 x 0.001	$1581.75
DFS-R-0010	160 x 0.02	10 x 0.001	50 x 0.005	$1581.75
DFS-R-0025	400 x 0.05	25 x 0.002	100 x 0.01	$1581.75
DFS-R-0050	800 x 0.1	50 x 0.005	250 x 0.02	$1581.75
DFS-R-0100	1600 x 0.2	100 x 0.01	500 x 0.05	$1581.75
DFS-R-0200	3200 x 0.4	220 x 0.02	1000 x 0.1	$1581.75
DFS-R-0500	-	500 x 0.05	2500 x 0.2	$1581.75
DFS-R-1000	-	1100 x 0.5	5000 x 2	$1581.75

Specifications

Accuracy: ±0.1% of full scale (dedicated SLC sensor) ±0.25% of full scale (interchangeable SLC or STS sensors)
Certification: calibration with NIST data, IEC/ISO17025 optional
Data Sampling Rate: 5000 Hz
Peak Capture Rate: 5000 Hz
Display Update Rate: 10 Hz
Tare Capacity: 10% full scale
Overload Protection: 150% full scale
Display Characteristics: high resolution, dot matrix LCD, 8 lines, 40 characters, adjustable contrast, invert and hide capability
Automatic Shut Down: configurable time. May be disabled.

Data Storage: 10 results, optional NEXYGEN software for unlimited storage and automated testing and analysis.
Test Stand Control: Compatible with Chatillon TCD series test stands and Chatillon TCM series test stands
Outputs: RS-232, Mitutoyo (Digimatic) and ±2Vdc analog
Power: Battery or direct AC operation. Universal Power: 120V / 230V, Rechargeable nickel metal hydride (supplied)
Battery Life: 30 hours, continuous use. Gauge may be operated with direct AC power source
Instrument Weight: 1.5 lbs
Operating Temperature: 40 to 100 F (4 to 38 C)
Warranty: 2 years

SLC Loadcells and STS Torque Sensors

SLC Series Loadcells for DFS-R Gauges:

The Chatillon SLC series loadcells are full-bridge strain gauge sensors complete with 15-pin plug. These loadcells are used exclusively with the Chatillon DFS-R series gauges. The loadcell values and sensitivity factors are stored in memory within the sensor plug. When connected to a DFS-R gauge, the capacity and calibration points are automatically recognized by the instrument. The instrument then becomes a full-featured load measurement instrument. The SLC loadcells meet ASTM E4 and BS EN ISO 7500 part 1 for a ±0.25% accuracy sensor. The loadcells are connected to the DFS-R gauge with a retractable cord that extends fully to nearly 9 feet (3 meters).

STS Series Torque Sensors for DFS-R Gauges:

The Chatillon STS series torque sensors are full bridge strain gauge sensors complete with 15 pin plug. These sensors are used exclusively with the Chatillon DFS-R gauge. The sensors torque values and sensitivity factors are stored in memory within the sensor plug. When connected to a DFS-R indicator, the capacity and calibration points are automatically recognized by the instrument. The instrument then becomes a full-featured torque measurement instrument. The STS series torque sensor meet ASTM E4 and BS EN ISO 7500 part 1 for a ±0.25% accuracy sensor. The sensors are connected to the DFS-R gauge with a retractable cord that extends fully to nearly 9 feet (3 meters).

Overview

Features

Features:

SLC Loadcells and STS Torque Sensors

Other Models

You are viewing this product