The PS R1 Series Precision Balance represent a new standard, featuring a LCD display which presents a clear weighing result. In addition, the display has a new text information line providing additional messages and data (e.g. product name or tare value).

The PS R1 have pans in two possible dimensions: 128x128 mm or 195x195 mm – the smaller pan includes a draft shield. This series includes an external mass adjustment/calibration system.

PS R1 balances feature several communication interfaces: 2 x RS 232, Type A USB, Type B USB and optional Wireless Connection. The housing is made of plastic, and the pan is made of stainless steel. The balances also have the option of weighing outside of the pan (under hook weighing).

Databases:
Registration of both users and products is provided along with weighing results for further analysis. Specifically, the data is registered in 5 databases:

• Users (up to 10).
• Products (up to 1000).
• Weighments (up to 5000).
• Tares (up to 100).
• ALIBI memory (up to 100,000 weighments).

Bi-directional data exchange is possible thanks to a quick USB interface. ALIBI memory is contained in a secure zone ensuring security over the long term.

Quick Access to Information:

• Direct access is available from the keyboard level:
• Database – Aforementioned databases.
• Function - Basic functions.
• F1 to F4 – Programmable function and navigation keys.

FEATURES

INTERFACES
• 2×RS 232
• USB-A
• USB-B
• Wireless Module (option)

EXTRA FUNCTION KEYS
• The balance comprises 2 buttons enabling easy access and 4 programmable function keys.

ADDITIONAL INFORMATION LINE
• Display has a new text information line allowing to show additional messages and data, e.g. product name, operator name or tare value, etc.

• AUTOTEST - Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use. When speaking of repeatability it may be also used for weighing time optimization. Autotest is operated in an automatic mode thus operator’s time is saved.
• CHECKWEIGHING - Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual /- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961
• DOSING - Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph - load indicator. For industrial scales it is possible to use a control systems of dosing process.
• PARTS COUNTING - Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.
• PERCENT SETUP - Percent setup function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly excessed.
• GLP PROCEDURES - Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
• STATISTICS - Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.
• TOTALIZING - Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.
>UNDER HOOK WEIGHING - UNDER HOOK WEIGHING
• ANIMAL WEIGHING - Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimaze the function depending on the measured product characteristics.
• DENSITY DETERMINATION - Liquid or solid body density function uses the Archimedes principle and it requires a special kit to be applied. The kit when used, replaces a weighing pan. For solids mass of the sample must be determined first in the air, next in the liquid of specified density. For liquids the so called sinker, density of which has been determined, must be measured first in the air, next in the tested liquid. The density determination process is disturbed by air bubbles which may stick either to the measured sample or the sinker. In case of laboratory equipment very light solids may be measured. For industry, solid bodies density may be determined by means of under-pan weighing. Tested load of significant size may be measured this way.
• PEAK HOLD - Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

Model	PS 360.R1	PS 1000.R1	PS 4500.R1.M	PS 6000.R1.M
Capacity x Readability	360 g x 1 mg	1000 g x 1 mg	4500 g x 0.01 g	6100 g x 0.01 g
Tare range	-360 g	-1000 g	-4500 g	-6100 g
Linearity	±2 mg	±3 mg	±20 mg	±30 mg
Repeatability	1 mg	1.5 mg	10 mg	15 mg
Sensitivity drift	2ppm/°C in temperature +15 - +35 °C
Working temperature	+10 - +40 °C
Pan size	128×128 mm		195×195 mm
Stabilization time	2 s		1.5 s
Display	LCD (backlit)
Power supply	12 ÷ 16 V DC / 250 mA (350 mA for scales with Wireless Connection)
Interface	2×RS 232, USB-A, USB-B, Wireless Connection (option)
Adjustment / Calibration	external
Net weight/Gross weight	3.5/5.5 kg		3.6/5.1 kg

R Series Laboratory Balances (EN) from RADWAG Balances and Scales on Vimeo.

Other RADWAG PS R1-Series Balances

---

Image	Name			Price
	RADWAG PS 360.R1 Precision Balance 360 g x 1 mg SKU: PS-360.R1 Capacity x Readability : 360 g x 1 mg Pan Size: 128 X 128 mm More Info			$902.50
	RADWAG PS 1000.R1 Precision Balance 1000 g x 1 mg SKU: PS-1000.R1 Capacity x Readability : 1000 g x 1 mg Pan Size: 128 x 128 mm More Info			$971.85
	RADWAG PS 4500.R1.M Precision Balance 4500 g x 0.01 g SKU: PS 4500.R1.M Capacity x Readability : 4500 g x 0.01 g Pan Size: 195 x 195 mm More Info			$864.50