Force Test Stands
| Model |
Force Capacity
lbs (N) |
Max Travel1
in (mm) |
Loading Method |
Travel Rate
in (mm) |
Daylight2
in (mm) |
Included Accessories4 |
ESM
 |
200
(1000) |
13
(330) |
Motorized |
0.5-13
(13-300) per min |
14
(356)3 |
Tool kit, extension rod, small hook, medium hook, #10-32 coupler, 2" compression plate |
ESMH
 |
50
(250) |
12
(305) |
Motorized |
0.2 - 50
(5-1270) per min |
13 (330)
(12 with optional travel display) |
TSM500
 |
500
(2200) |
4
(102) |
Motorized |
0.2 - 5.5
(5-140) per min |
14
(356)3 |
Tool kit, small hook, medium hook, large hook, extra large hook, 1/2-20F adapter plate, 2" and 3" compression plates, couplers (#10-32 and 5/16-18) |
TSM500H
 |
500
(2200) |
4
(102) |
Motorized |
0.2 - 5.5
(5-140) per min |
16.5
(419)3 |
TSF
 |
1000
(5000) |
4
(102) |
Side-mounted hand wheel |
0.013
(0.34) per wheel revolution |
14
(356)3 |
TSFH
 |
1000
(5000) |
4
(102) |
Side-mounted hand wheel |
0.013
(0.34) per wheel revolution |
16.5
(419) |
ES05
 |
30
(150) |
1.5
(38) |
Lever |
- |
- |
n/a |
ES10
 |
100
(500) |
9
(229) |
Lever
|
1.05
(26.7) per lever revolution |
9
(229) |
ES20
 |
100
(500) |
9
(229) |
Top-mounted hand wheel
|
0.06
(1.5 ) per wheel revolution |
9
(229) |
ES30
 |
200
(1000) |
13
(330) |
Side-mounted hand wheel
|
0.05
(1.3 ) per wheel revolution |
14
(356)3 |
Tool kit, extension rod, small hook, medium hook, #10-32 coupler, 2" compression plate |
TSA750 / TSA750H
  |
750
(3750) |
w/stops: 2.75 (70)
w/o stops: 6 (152) |
Rack & pinion, lever can be positioned in 30 degree increments
|
3
(76.2) per lever revolution |
TSA750: 10.5 (267)3
TSA750H: 14.5 (368)3 |
Tool kit, medium hook, large hook, 2" compression plate |
TSB
 |
100
(500) |
w/stops: 2.75 (70)
w/o stops: 6 (152) |
Rack & pinion, lever can be positioned in 30 degree increments
|
3
(76.2) per lever revolution |
13
(330) |
n/a |
TSC1000 / TSC1000H
  |
1000
(5000) |
3.5
(89) |
Inline hand wheel
|
0.1 (25.4) per wheel revolution |
TSC1000: 10 (254)3
TSC1000H: 13 (330) 3 |
Tool kit, medium hook, large hook, 1/2-20F adapter plate, 2" compression plate |
Torque Test Stands
| Model |
Torque Capacity
lb-in (N-in) |
Max Angular Travel, resolution |
Loading Method |
Rotation Rate
in (mm) |
Daylight2
(w/STJ torque sensor)
in (mm) |
Maximum Slider Travel, Travel Rate6
in (mm) |
TST / TSTH
  |
100
(11.3) |
∞, 2° |
Side-mounted hand wheel
|
12° per wheel revolution |
TST: 15 (381)3
TSTH: 16 (406)3 |
15.5 (394), 1.047 (26.6) per lever revolution |
TSTM / TSTMH
  |
1000
(5000) |
∞, 2° |
Motorized
|
0.3 - 8.6 RPM
(4-52°/s) |
TSTM: 13 (330)3
TSTMH: 16 (406)3 |
15.5 (394), 1.047 (26.6) per lever revolution |
All torque test stands include a tool kit.
Notes
1. Maximum travel depends on the grips or fixtures used during testing. The dimensions indicate distances without the use of grips or fixtures.
2. The clearance between the bottom of a mounted force gauge or sensor and the loading surface of the stand. This distance will be less if grips or fixtures are used. The numbers in this chart are approximate. If your test sample size is very close to the daylight figure above (or daylight less grip(s) or fixture(s)), a column extension may be necessary.
3. Longer columns available.
4. All force test stands include force gauge mounting screws.
5. All torque test stands include an adapter to secure the STJ torque sensor during testing. Adapters are also available for other torque sensors.
6. The slider is intended for engaging and disengaging samples. The torque sensor adapter is mounted to the slider. |
