• Front-panel configuration - Make easy configuration choices without opening the unit and hunting for the right dip switch. Calibrate and adjust linearity from the front panel.
• Convenient size - Approximately 2-7/8 inches high, 8-1/3 inches wide and 9 inches deep, the FI-90 Force Indicator fits easily on any table top or mounts on a vertical surface using the optional panel-mount kit.
• Gross / peak key - Switches instantly between gross and peak-hold modes. Peak-hold mode saves and displays the highest displayed reading.
• Three units of measure - User selects pounds, kilograms or newtons with a touch of the UNITS key.
• Battery backup - Information is stored and saved in memory in case of power failure.

Features

• Selectable AC or 6-volt battery operation - Includes internal sealed lead-acid rechargeable battery, internal charger, low-battery indication, on/off (AC) switch and programmable automatic shutdown.
  • Battery operation - Includes four internal D-cell alkaline batteries, low battery indication, on/off switch, and programmable automatic sleep mode. (Does not come with AC power.)
  • Twelve-volt DC operation - DC power operation using a 12-volt external source 230 VAC operation.
• RS-232 / 20 mA serial output - Transmit data on request, continuously, or use the peak-hold autoprint function.
• Setpoints - Two front-panel programmable setpoints with one user-defined remote key input. Interfaces with remote relay box.
• Analog output - Dip-switch selectable. Isolated analog output: 1-5, 4-20, 10-50 mA. 0-5, 0-10 VDC (On AC models only)
• Junction box - For summing up to four loadcells

Specifications

• Enclosure: Impact-resistant, ABS plastic; RFI coating 2.875" high x 8.36" wide x 9.11" deep (7.3 cm x 21.1 cm x 23.1 cm)
• Display: 7-segment LCD; 6-1/2 digits plus sign, .5" (1.3 cm) high; moveable decimal
• Control keys: ZERO/CLEAR, GROSS/PEAK, UNITS, PRINT, MENU, SELECT
• Annunciators: Center-of-zero, gross, peak, lb, kg, newtons, and battery
• Analog to digital conversion rate: 60 times per second
• Peak detection rate: 60 times per second
• Display update rate: 2 times per second
• Resolution: Up to 10,000 divisions, standard
• Increments: 1, 2, 5, 10, 20, 50 or any submultiple to .0001
• Capacity: Front-panel configurable for values from 1 to 400,000 lb or 200,000 kg
• Span range: .2 to 3.5 mV/V
• Zero range: ±0.2 mV/V (zero information stored in memory)
• Load cell excitation: 5 VDC, drives up to four 350-ohm load cells
• Cable connection: Standard 7-pin
• Power: 117 VAC +10 / -15%, 50/60 Hz, 5 watts max.
  Optional 230 VAC +10/-15%, 50/60 Hz, 5 watts max.
  Optional 12 VDC (10 - 14 VDC)
• Battery operation: Internal 1.3AH rechargeable battery.
• Continuous operation: one 350-ohm load cell, 32 hrs-four 350-ohm load cells, 15 hrs
• Alkaline battery operation: Four internal D-cell alkaline batteries.
• Continuous operation: one 350-ohm load cell, 200 hrs four 350-ohm load cells, 100 hrs
• Operating temperature: 14° to 104° F (-10° to 40°C )
• Warranty: Two years

Back to Main Dillon Page

Click here for Brochure
(Adobe PDF)