Chatillon SPK-FMG-011A Flat Adapter 100 lbf 500 N more Details ...

Dillon 36316-0607 Serial Cable, USB mini to USB Input 5 ft (1.5 m) more Details ...

Dillon AWT20-508267 Select cable gauge - for reference only - 1/16" to 1.0" / 8 mm to 19 mm more Details ...

The External Trigger immediately synchronizes the stroboscope with a rotating object. The sensor is aimed at a ferrous target mounted on the drive shaft and triggers the strobe to flash each time the target passes the sensor. ET-1 is complete with sensor, cables and AC adapter. more Details ...

Use wire wrapping grips to test the tensile strength of wires, filaments, fibers, etc. more Details ...

Easy-to-clamp, spring-loaded wire wedge grip more Details ...

Grips for wire terminal testing, opens to 6mm. more Details ...

Check wire crimp terminals with these test fixtures. more Details ...

For DIS, series I more Details ...

Imada AP-200V Vise Mounting Plate for DWT-200 more Details ...

Imada SS-209 USB Cable for DID and DIW more Details ...

Pin grip accommodates small diameter wires and filaments. more Details ...

Self-tightening “buckle-type”mechanism tape grips ensure slip-free operation. more Details ...

Use the T-Slot Table for easy exchanging and positioning of grips. more Details ...

Imada CA-200 Stepless one-way clutch (CW), 200 lbf-in, 3/8 Inch drive for DIW-20 more Details ...

Joint Simulator for DI-4B-25. HardJoint, 14mm Hex Drive. Intergral impact torque tester. more Details ...

Imada SJ-2000E Spring Adapter for DI-1M-500 more Details ...

Cable for ZTS and ZTA more Details ...

Imada RA-700 Ratchet clutch, 700 lbf-in, 3/8 Inch drive for DIW-20 or DIW-75 more Details ...

Use the puncture fixtures for films to secure the test sample and check the strength of liquid crystal film, auto battery covers, thin aluminum, PET bottles, retort pouches, etc. more Details ...

WG-3 Multi Terminal Grips have 12 wire gauge apertures (up to 8mm) on the turret. Locate and lock the appropriate size. more Details ...

Capacity up to 20lbf. Large Hook for pulling larger samples. Swivels at base. more Details ...

Large Flat Heads are suitable for compression testing. Ideal for crushing strength test of medicinal tablets, top load test for bottles, compression spring testing. more Details ...

Impact Torque Testers with Remote Sensor. Super heavy duty. more Details ...

Joint Simulator for DI-4B-25. Hard Joint, 14mm Hex Drive more Details ...

High cpacity gauge extender plate. more Details ...

Force control cable for MX / MH and ZTS / ZTA more Details ...

90 Degree Peel Slide Bearing Table more Details ...

DB-1 is a simple, compact, one channel interface that enables the user to send measurement data to a PC running SW-1, Imada data acquisition software, or other software. more Details ...

SW-1 Software. For DPS and the DPSH. more Details ...

Swivel Compression Plates are made in various shapes and sizes. more Details ...

Coil Cable for HTG2 and HTGS more Details ...

GTW-50L 220 lbf Center-open Vise Grip more Details ...

Cam Grips are ideal for tensile testing of thin, narrow samples. more Details ...

Use bend stands to support test rods, strips, etc. to check their strength. more Details ...

Analog cable for Z2, Z2H, Z2S, ZP, ZPH, ZPS, HTG2 and DTX2 more Details ...

Imada CR2354 Battery more Details ...

This is an accessory kit for Mark 10 M2-2 and M2-100 Force Gauges. This kit includes a hook, flat, cone, chisel, v-groove, and extension rod. more Details ...

Mark-10 AC1094-4 Single column extension, 6 in / 150 mm, F505H more Details ...

Mark-10 09-1049 Cable, gauge to Analog, dual banana plug more Details ...

Mark-10 EMF010-1 Graphing & Reporting Functions for Series-F more Details ...

Mark-10 AC1030 Replacment AC adapter/charger, 110V US more Details ...

Reflective tape strip. Measures 7-3/4" length by 1" width. more Details ...

Shimpo FG-M10CL Steel Chisel Adapter, M10 Thread For use with 500 - 1000 lb force gauges more Details ...

Shimpo FG-M6CL Steel Chisel Adapter, M6 ThreadFor use with 2 - 200 lb force gauges more Details ...

Jacob’s Chuck Grip attachments are designed for testing low gauge wire and rigid rods. The Chuck Grip accepts material diameters from 0.02” (0.05 mm) to 0.20” (5 mm). more Details ...

Shimpo FG-M4CN Aluminum Cone Head Adapter M4 Thread,For use with 0.5 and 1 lb force gauges more Details ...

Shimpo FG-M4CL Aluminum Chisel Adapter, M4 Thread For use with 0.5 and 1 lb force gauges more Details ...

Shimpo FG-7USB USB Cable for FG-3000 and FG-7000 Force Gauges more Details ...