AWT05-508649: 250 lb x 0.05 lb more Ball Top AWT05-508650: 250 lb x 0.05 lb more Specifications Chart

Avery Weigh-Tronix 7829 Scales Select 7829 250 x 0.05 lb $1,495.00 7829 w/Ball Top 250 x 0.05 lb $2,086.00 Specifications Chart Legal For Trade

Designed with a hard wearing stainless steel weight platter and a rugged powder coated carbon steel base housing which helps to fully protect the centrally mounted aluminum analog load cell from damage.

Supplied with a built-in, flush-fitting, six digit ½” high LCD display that is mounted centrally in the front face of the base

An optional second remote display can be plugged in to give a customer facing weight reading. A range of emulation protocols are available within the scale to allow you to quickly select the correct compatible communication protocol to interface with a wide range of third party post, mail and shipping software programs or host devices. This will be communicated through either a serial RS232, USB (HID) or USB (VCP) port found at the rear of the base.

Specifications

Model	7829 AWT05-508649	7829 AWT05-508650
	$1,495.00	$2,086.00
Capacity x Readability	250 lb x 0.05 lb	250 lb x 0.05 lb
	100 kg x 0.02 kg	100 kg x 0.02 kg
Platter Size	20" x 20"	20" x 20"
Legal For Trade	NTEP approved for use in Class III operations, CC 95-121
Computer Interface	1 x RS232 (9 way female D Type connector ), 1 x USB HID (Mini USB) or 1x USB VCP (USB-Type B) 1 x 2nd Remote display connection (RJ 45) All are positioned on the rear of the base
Platter Type	Stainless steel weight platter	Stainless Steel Ball Top (9 balls)
Display Type	Flush fitting six digit, ½” high LCD display. Optional 2nd remote six digit, ½” high LCD display housed in an extruded enclosure with a 7 foot cable, connected via RJ 45 connector on the rear of the scale base
Display Bracket Options	Optional 12” high pole mounted display bracket
Number of Displays Allowed	2 (1 standard, 1 remote display optional)
Base Construction	Durabridge® design, with powder coated carbon steel base housing and aluminum NTEP approved analog load cell Duarabridge Technology helps reduces overall scale deflection when a full load is applied
Feet	Lockable adjustable feet, 1” diameter with up to 1” of height adjustment
Power	120 VAC (+10% -15%), 60 Hz, standard 3-wire ground
Operating Environment	Temperature: 42° F to 104° F (5° C to 40° C) Relative Humidity: 10 to 95% (non-condensing)
Remote Display Housing Sizes	8” x 3” x 1.5”
Operational Keyss	ZERO: Includes Auto Zero Tracking or Manual push button to re-establish zero reference TEST: Runs a diagnostic test to ensure scale is fully functional and allows a real-time view of internal settings
Units of Measure	lb or kg (lb default)”
Configurable Selections	Capacity, resolution, lb or kg, filters, baud rates, protocols, auto printout, scale or post classifier Default configuration is as postal weight classifier
Calibration	2 point calibration process (zero and span capacity) Field calibration can be carried out by using less than full capacity weights Gravity compensation to allow the local gravity to be entered for where the scale is to be used
Internal Resolution	1 part in 120,000
Self-Diagnostics	2 level diagnostics: front panel display test or full service diagnostics (Display, RAM,ROM, input/output & high resolution x10 division test)
Supported Protocols	Standard NCI default with field configurable settings of 8213, 3835, SMA, with Auto Weight Send (1200 – 19.2K baud range) Transmits weight and scale status whenever ASCII “W” is sent by a remote device.